Exclusive Tips For Removing Old Fireplace

Removing Old Fireplace

Dismantling the fireplace and replacing it with a new one is one of the best ways to breathe new life into the fireplace, but when you come here, you might be wondering how easy it is to make a fireplace yourself? Or do you need a designer?

This article shows how a fireplace frame is removed, how a replacement frame is selected, and how a new frame may be connected to the wall.

Table of Contents

How to remove a chimney edge.

The removal of an old fireplace frame relies on how it initially fits. Instead of a historic chimney, removing the frame from an antique fireplace shouldn’t be too difficult for a more modern chimney, such as gas or an electric fireplace. But it takes a little DIY talent to make sure that the wall isn’t too unclean.

Fire Frame attached with fasteners

Fire Frame

This is a typical way of attaching multiple garments to the wall. These are little brackets that are attached to the wall with screws around the border of the fire habitat. It is hidden behind a cast most of the time. The surroundings of cast iron fire are typically so connected to the wall.

To start removing one of these fireplace frames, you need to remove the plaster around the edge of the fireplace. This should expose the tags that fasten it to the wall. Then you can start to remove the screws that separate the frame from the wall. Be very careful in this step and make sure there is some support on the edge of the fire so that it does not fall off the wall. Second, hold it with both hands until you can remove it, then gently lift it up. In this case, if you remove the edge of the fire, the paint, wallpaper, or plaster will look dirty. So make sure you have everything you need for some refurbishment after completion.

The wall fastened with the wood fire frame

If a wooden fire framework is removed, the wooden laths linked to the fire may have been screwed to. In this case, there are screws on the outside of the fire environment, which can be closed with pins or painted. You need to loosen the screws that separate the shelf from the panel; again make sure that the panel falls off in a controlled manner and does not fall to the floor. You can then remove the wooden slats that may be screwed to the wall.

Attached bracket fire envelope

This is one of the simplest and easiest ways to remove a firing frame from a wall.

A concealed fireplace heater bracket is used for many modern fire settings. One bracket is fastened to the wall and the fire frame is bound by a corresponding second bracket. Then they just glide together without having to appear chaotic on the edges. If your fireplace frame has a hidden bracket, you can remove it by simply lifting it and gently removing it from the wall.

How to install a new chimney

As we saw earlier, the manner in which a fireplace frame may be fixed on the wall is many various. You may have to go to a local hardware shop in order for you to locate certain fixtures from a special mantel by the manufacturer on the best approach to install them.

Please pick the right fire frame size first. Important

The most critical thing to ensure you are correctly tailored to your current fire when installing a new fire environment. Measuring your present surround sound and buying one of the same sizes is the easiest thing to do. The key items to be verified are:


  • The height and width of the opening, and;
  • The chimney cut

What is a discount on a fireplace?

When building a fireplace frame, the fireplace rebate is frequently the most confusing.

So just what is the surrounding fireplace rebate and how is it measured? You’ll see that the inner depth of your leg is shorter than the outside of the leg while staring at a fire environment and they are not fully aligned. This is done to accommodate for the back panel projection, that the frame has to allow some room around the opening.

In general, you have to measure the distance from the wall to the front of the rear panel to measure your fireplace refund. This ensures that the outer legs of the fire stand are against the wall, while the inner legs are against the back wall. If for some reason your fireplace does not have a back wall, no refund is required. The other external dimensions of the new fire environment may be different from the old one. Keep in mind that if it is smaller, you may need to repaint or repaint the space previously covered by the mantel.


Please enter your comment!
Please enter your name here