When Choosing LED Grow Light. A grow light is an electric light used to kindle the plant’s growth, as it emits light identical to the rays of the sun. Various types of led grow lights suit the needs of the different plant types that you have at home. Picking the best LED grow light is a challenging task. Here are some things to remember when buying one for your plants.
Table of Contents
1. Calculate The Area That Requires Grow Led Lights
Always ensure you measure the area where you want to position the grow lights. Make sure you measure by calculating the location’s square footage. When measuring the area, please ensure that you don’t measure the whole area but just the growth area that belongs to your plants. Thus you can avoid purchasing lights to cover the entire area. You can calculate easily using the following calculation method:
Width x depth = square feet
Wattage Required = Watts x square feet
2. Decide on Grow Light Watts Depending On The Plant Types
If you want to light up high plants like tomatoes, you’ll need around 40 watts of lighting, as it’s essential to maximize the plant’s fruit-bearing capacity and development. You can use 25-30 watt of energy with small plants like herbs and lettuce. Assess the nature of the plants you have, and buy the lights at reasonable prices from the Led wholesalers.
3. Consider The Fixtures Of Grow Light
Typically, for flowering plants, gardeners prefer using metal halide fixtures to encourage vegetable growth; they prefer HPS or High-Pressure Sodium. They feel strongly that increasing light could increase production by 20%. For the flowering plant season, they adopted a method of switching on the HPS and using the other fixture for the vegetation crop time.
But you will find today that there are switchable ballasts available in such configurations as 400 and 1000 watts. This fixture allows you to use both lights, depending on your needs. If you like tomatoes, the plant would have lots of flowers, and thus the best choice will be to opt for the 400 HPS grow light. In your locality, you can quickly locate one at any of the Led wholesalers.
4. Choose The Reflector Type
When you decide to have a grow light, make sure that you select the right type of reflector. While preparing to set up grow led lights, this is important as it helps in standardized distribution across the entire growing area. Horizontal reflectors are very powerful as opposed to vertical reflectors; they increase the light by 40 percent.
You can also have flanges that reflect air-cooling properties and tempered glass to spice up the look. This would give a Christmas lights-like look that would encourage your growing room’s coolness and help keep away the heat produced by the grow bulb.
5. Ensure it has a proper system of cooling
The LED growing light may overheat, mainly if you use it for enough light for the plants for at least 15 hours a day. As already stated, excessive heat will damage your plants and the device itself. Your LED grow lights should also have an effective cooling system.
The heat in the LED bulbs occurs at the back, so the heat sink should be in that area. It takes away the heat, so it does not overheat the plants or the devices.
Conclusion
LED grow lights are a ground-breaking solution for plant growth. Sunlight is not always enough to grow your plants, particularly in places with long winters without sunlight. These considerations will help you determine how to select a grow light and improve its light beam. Now you can take care of your plants and watch them blossom and bear fruit.
